» Technical Support

Masterpac-Asia has the most number of experienced personnel to service our customers upon requests [read more...]

» Safety Valve Testing

Valve testing is done on a state of the art testing machine being the only one of its type in Thailand. Having twin test beds, it has a capacity to test valves up to 400NB (read more...)

» MP 1234 (ORWIR)

● Prevents turbulences, protects
the flanges from erosion and also protects the inner windings of the gasket element from high temperatures
● Suitable for raised face or flat face
flanges

» Camprofile Style HEG-C2

● Utilizing an integral outer location ring for correct gasket positioning within the mating flange bolt circle
● Recommended for use on standard raised face and flat face flange assemblies

» Double Jacketed Gasket

● Good compressibility and resilience
● The filler material is completely enclosed by a two piece metal jacket, which covers both the inside and outside diameters and both contact surfaces

» RTJ Type R

● Available in two basic types, an oval cross section and an octagonal
● These basic shapes are used in pressures up to 5,000 psi

» MP 4430

● General purpose material
● Max Temp.: 350 C , Max Pressure: 30 Bar
● Suitable for use in wide range of application including air, water, hot water, steam, oil, gases and general chemical

» Novus 30

● Aramid fibre & inorganic + Nitrile binder
● Max Temp.: 400°C, Pressure: 80 bar
● Used for hot and cold water, steam, oils, fuels, gases and wide chemical

» Uniflon 53

● High performancebiaxially orientated PTFE with barium sulphate filler
● Max Temp.: 260°C Pressure 100 Bar
● Suitable for hydrofluoric acid, alkalis, solvents, fuels, water, steam and chlorine

» Thermiculite 815

• Thermiculite Fiber reinforced with SS316
• Max Temperature: 982°C (1800°F)
• Max Pressure: 200 bar

» PTFE (Teflon)

● Variety of shape and style
● Max Temp.: -180 to 260°C, Max Pressure 100 Bar
● Often used in containers and pipe work for reactive and corrosive chemicals

» Graphite Tang

● Flexible graphite sheet reinenforced stainless steel foil
● Temp.: -200 to +650°C, Pressure 140 Bar
● Consists of 304 or 316 Stainless Steel Tanged which provides a better resistance to a wide range of pressure

» Viton (FKM)

● Most specified fluorocarbon elastomer
● Service Temp. -15ºC to 200ºC
● Good resistance to oils, fuel, chlorinated solvents, aliphatic and aromatic hydrocarbons and strong acids

» Neoprene (CR)

● A family of synthetic rubbers
● Service Temp. -20ºC to 90ºC
● Suitable for use against moderate acids, alkalies and salt solutions. It has good resistance to commercial oils and fuels

» MP 4130D

• Made from pure PTFE
• Temp. -268°C to 260°C, pH 0-14
• Pressure 500 PSI, Speed 1500 FPM
• Recommend for valve in food & drink, acid & alkali, petro chemical application

» MP 8005I

• Made from Pure Graphite + Inconel wired
• Temp. -240°C to 650°C (in steam)
• Pressure 4500 PSI, pH 0-14
• Recommend for power plants, steam valves (Not used in rotary service)

» Fire Escape Hood

● Able to protect from smoke and toxic gases up to 60 minutes
● Protect your head from hot burning ash or direct flame up to 800°C

» Rapp-it

● Achieve successful repair in 30 minutes
● Made from fiberglass bandage impregnated with polyurethane resin